Programming the remote, Programming without a code, Component codes – Panasonic CT-32G8 User Manual
Page 10: Ct-27c8, Ct-32c8) programming the remote
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
R
emote
C
ontrol
O
peration
(
models
CT-27C8
and
CT-32C8)
Programming The Remote
The Universal Remote Control can be programmed to
operate many manufacturers’ components, using the
component function buttons for VCR, DVD, CABLE or
DBS. Follow the procedures for programming your Remote
Control with or without a code for the component.
I
_l
Z
lU
1 Device
Operates
Default 1
TV............
TV (Panasonic Only)
.... Panasonic Code
DBSfCBL
DBStCBL (Preset)
Panasonic DBS Code
VCR
VCR (Preset)
.... Panasonic Code
DVD .......
DVD (Preset)
.... Panasonic Code .....
Note:
Determine the manufacturer of the component and look
in the table for the code (found on page 9).
Procedure
•
Confirm that the external component is plugged and
operating.
•
Turn the component off.
ACTION
•
Press
and
together, for at least 5
seconds.
•
Press appropriate component button on the Remote
Control VCR, DVD, CABLE or DBS.
•
Enter the 3-digit component code using the Remote
Control numeric keypad (0 ~ 9 buttons).
•
Press the Remote Control
to test the
component,
if
the
procedure
was
successful,
the
component will turn on.
Note:
If the component does not operate with the Remote
Control, repeat the procedure using another code.
(Some
brands have multiple codes). If an incorrect code
is entered, or if the procedure takes longer than 30
seconds, the programming wili fail.
Programming Without A Code
This procedure searches all codes and is called the
“sequence method.”
•
Confirm that the external component is plugged in
and on.
•
Turn the component off.
ACTION
•
Press ....... and
together, for at least 5
seconds.
•
Press appropriate component button on the
Remote Control.
•
Press VOL ► to move forward to the next code.
Press A VOL to move backward.
Press the Remote Control
to test the
Note:
component, if the procedure was successful, the
component will turn on.
Repeat the above steps until the component code is
found. It may take many attempts before the correct
code Is found.
ACTION
• After the code is found, press
to store the
code.
Component Codes
The Universal Remote Control is capable of operating
many component brands after entering a code. Some
components may not operate because the codes are not
available due to limited memory. The Universal Remote
Control does not control all features found in each model.
Write the code numbers from tables in this space.
This will serve as a reference if you need to program
your Remote Control.
VCR
CABLE
DVD
DBS
n
n
n
1_1
1_1
1_1
8
•