Kofax Export Connector for ERP 2.4.9 - Manual (Page 27)

Kofax Export Connector for ERP Installation Guide 27
Appendix A
Uninstalling
Before you uninstall KEC-ERP, ensure that no batches use the export connector. Check each
document class in each batch individually.
Removing References to KEC-ERP
1 Verify that you have a working SAP connection.
2 From the Kofax Capture Administration Module, navigate to the Batch tab and expand
the .
3 Right-click the and select Release Scripts or Export Connectors.
The configuration window opens.
4 If Kofax Export Connector - ERP appears in the Assigned Scripts column, select the
Kofax Export Connector-ERP and click Remove.
The system moves the Kofax Export Connector - ERP to the Available column.
5 Repeat these steps for each document class that used KEC-ERP.
Removing Registration
If no batch classes use KEC-ERP, remove KEC-ERP from the list of available export
connectors.
1 Access theRelease Script Manager window:
▪ For Kofax Capture 9.x, select Tools > Release Script Manager.
▪ For Kofax Capture 10.x, select Tools > Export Connectors.
2 Right-click the Kofax Export Connector - ERP script and select Remove.
3 Close the window.
Running the Setup Wizard to Remove KEC-ERP
1 Launch the file KofaxExportConnector-x.x.x_for_ERP.msi where x.x.x is the current
release number.
The Welcome window opens.
2 Select Remove Kofax Export Connector - ERP and click Finish.
The system displays a progress bar.
3 When the system displays a success message, click Close.