Kofax Ascen 7.0 Release Script - Manual (Page 27)

Ascent® 7.0 Release Script for IBM DB2 Content Manager Enterprise 8.3/8.4 Release Notes
Kofax, Inc. 21
Figure 3. Ascent Capture Content Manager Login Information Dialog Box
Note
The login information will be saved and used during release.
6 To prompt for a user ID and password if the release script is not able to log on to IBM DB2
Content Manager at release time, select the “If unable to log in during release, prompt for
valid login information” check box.
„
If selected and there is a problem logging on to the IBM DB2 Content Manager
Enterprise release script, the Ascent Capture Content Manager Login Information
dialog box will appear during release. The user may then enter valid login data and
click OK. However, if the user clicks Cancel, the release will fail and the batch will be
routed to the Ascent Capture Quality Control module.
„
If not selected and problems occur when logging on to the IBM DB2 Content Manager
Enterprise release script, the Ascent Capture Content Manager Login Information
dialog box will not display during release. Release will fail and the batch will be
routed to the Ascent Capture Quality Control module.
Note
Do not select this feature if you plan to run the Ascent Capture Release module as a
service or if you plan to run the Release module during off-hours. The Ascent Capture
Content Manager Login Information dialog box requires a user response, which interferes
with the automated nature of running the Release module as a service or without operator
attention.
7
Click OK. The Ascent 7.0 Release Script for IBM DB2 Content Manager Enterprise 8.3/8.4
— Release Setup dialog box will display, Figure 4 on page 22.