Clarion UNGO MS8200 - Manual (Page 15)

MS8200 / MS8300 Installation Manual - Page 13
Accessing the Jumpers and Switches
Using a flathead screwdriver, carefully press in on the
access tabs on the sides of the case until the hooks
release.
Take care not to push the tabs in too far or they may
break.
Once you have made your selections, close the case by
aligning the top and button halves of the case, making
sure that the tabs are over their mounting holes.
Setting the Jumpers and Switches
installation_rev3.qxd 7/26/99 6:07 PM Page 13