8english, Radio operation, Fm reception – Clarion XA311 User Manual

Page 6: Listening to the radio, Seek tuning, Manual tuning, Presetting stations, Preset scanning (preset station scan)

English

XA311

FM Reception

For enhanced FM performance the

tuner includes signal actuated stereo control

and Multipath noise reduction circuits.

Listening to the Radio

1) Press the FUNC button

to select the radio

mode. The radio turns on.

2) To tune to a desired preset station, first press

the BAND button

and select FM1, FM2,

FM3, FM4 or AM.
The band changes as follows each time the
BAND button is pressed:
FM1

➜

FM2

➜

FM3

➜

FM4

➜

FM1

3) Use the corresponding Preset buttons

select the desired station.

Seek Tuning

1) Press the BAND button

and select the

desired band.

2) Press the Up or Down buttons

to seek up

or down the frequency band. Seek tuning
automatically stops when a station is found.

Manual Tuning

1) Press the BAND button

to select the

desired band.

2) Press and hold the BAND button for more

than 2 seconds. “MANU” is illuminated on
the display and the manual tuning mode is
selected.

3) Use the Up and Down buttons

to manual-

ly tune up or down the desired frequency
band.

Presetting Stations

A total of 25 stations can be preset, 5 each for
the FM1, FM2, FM3, FM4 and AM bands.

Note:

•

When a station is preset, the station previously stored
in the memory at that position is cleared.

Presetting stations manually

1) Press the BAND button

to select the band

at which to store the station.

2) Use the Up and Down buttons

to tune in

the station to be preset.

3) Press and hold the corresponding Preset

button

for at least 2 seconds to store the

station into memory.

Auto store function (Automatic Station
Store)

1) Press the BAND button

to select the band

at which to store the stations.

2) Press and hold the AS button

for at least

2 seconds. Stations with good reception are
automatically stored at preset to the five but-
tons

1 to 5.

If there are fewer than 5 stations with good recep-
tion, the stations previously stored at the remain-
ing buttons are not cleared.

Preset Scanning (Preset Station Scan)

When the PS button

is pressed, the preset

memory numbers flash and the stations are
tuned in for 7 seconds each in the order in which
they were stored. Press the PS button again to
cancel the preset scanning mode.

Note:

•

The auto store mode is set if the PS button is pressed
for more than 2 seconds.

Radio Operation