Clarion XA311 - Manual (Page 5)

7
English
XA311
Adjusting the fader
1. Press A-M button 4 and select “FAD”.
2. Turning the Rotary knob 3 clockwise
emphasizes the sound from the front speak-
ers; turning it counterclockwise emphasizes
the sound from the rear speakers.
* The factory default setting is “0”. (Adjustment
range: F9 to R9)
3. When the adjustment is complete, press A-M
button 4 several times until the function
mode is reached.
Switching the Display
While pressing the BAND button 6 , press the
DISP button $ to enter the clock display mode.
Main display ➜ Clock display ➜ Main display
Setting the Clock
1) While pressing the BAND button 6 , press
the DISP button $ to enter the clock display
mode.
2) While pressing the BAND button 6 , press
and hold the DISP button $ for 2 seconds or
more. This enables the clock editing mode.
* The editable fields will be indicated when the dis-
play flashes.
3) To move between the hour and minute fields,
use the Up (hour) and Down (minute) buttons
1 .
4) To store the clock setting, press the BAND
button 6 .
Notes:
• If you select another operation mode before complet-
ing the above procedure, the clock setting operation
will be canceled.
• Removing the vehicle’s battery for a check or repair
will cause the clock to reset to 1:00. Set the clock
again if this happens.
Loading Tapes
Insert the cassette tape into the Cassette inser-
tion slot with the side on which the tape is
exposed facing the right. Playback starts auto-
matically.
* When the end of the cassette tape is reached, the
auto reverse mechanism is activated and the other
side of the tape begins playing automatically.
Note:
• Fully insert the cassette tape into the cassette inser-
tion slot.
Listening to a tape which is already loaded
Press the FUNC button
5 to select the tape
mode. Playback begins automatically.
Ejecting Cassette Tapes
Press the Eject button 9 . The cassette tape is
ejected.
* The radio mode is selected automatically 4 seconds
after ejecting the tape.
Fast-Forwarding and Rewinding
Use the FF button @ and REW buttons 0 .
: Press this to fast-forward the tape.
: Press this to rewind the tape.
* It is possible to listen to the radio during fast-forward,
rewind or search operations.
Switching to the Other Side of the
Tape
Press the PROG button ! both the FF button
@ and REW button 0 together at the same
time. Playback is switched automatically to the
other side of the cassette tape.
Tape Operation
Basic Operation