GEA Bock HG34P - Manual (Page 24)

24
D
GB
F
E
I
Ru
09618-11.2014-DGbFEIRu
10| Declaration of conformity and installation
DECLARATION OF CONFORMITY CE 03
for using the compressors within the European Union
(in accordance with Low Voltage Directive 2006/95/EC)
We hereby declare that the following refrigerating compressors
Product designation:
HG34P
comply with the Low Voltage Directive 2006/95/EC.
Applied harmonised standard:
EN 60034-1:2010
EN 60204-1:2006
DECLARATION OF INSTALLATION
for using the compressors within the European Union
(in accordance with Machinery Directive 2006/42/EC)
The manufacturer: GEA Bock GmbH, Benzstraße 7
72636 Frickenhausen, Tel.: 07022/9454-0
hereby declares that the refrigerating compressor HG34P complies with the basic requirements
of Appendix II 1B of the Machinery Directive 2006/42/EC.
Applied harmonised standard:
EN 12693:2008 and the corresponding standards referenced
A partly completed machine may only be put into operation when it has been established
that the machine, into which the partly completed machine is to be installed, conforms to the
regulations of the Machinery Directive (2006/42/EC).
The manufacturer undertakes to transmit electronically the special documentation required by
individual states for partly completed machinery on request.
The special technical documentation required for partly completed machinery has been created
in accordance with Appendix VII Part B.
Person responsible for documentation is: Wolfgang Sandkötter, Benzstraße 7, 72636 Frickenhausen.
Frickenhausen, 01.11.2011 ppa. Wolfgang Sandkötter,
Chief Development Officer