CLIFFORD bULLET II - Manual (Page 18)

Feature
Factory
setting
# of
momentary
presses
Secondary
action
Program
completion
confirmation
Result
Add a new
remote to
channel 2
(remote
accessory)
— 14 Press remote control button 2 2 chirps
Button 2/channel 2 code
of the new remote control
has been memorized
Add a new
remote to
channel 3
(silent
arm/disarm)
— 15 Press remote control button 3 3 chirps
Button 3/channel 3 code of
the new remote control
has been memorized
Add a new
remote to
channel 4
(optional
remote
accessory)
— 16 Press remote control button 4 4 chirps
Button 4/channel 4 code
of the new remote control
has been memorized
Add a new
remote to
channel 5
(remote
valet mode)
— 17
Press the side LevelShift
button once, then press
button 1
5 chirps
Button 1/channel 5 code
of the new remote control
has been memorized
Add a new
remote to
channel 6
(remote
headlights)
— 18
Press the side LevelShift
button once, then press
button 2
6 chirps
Button 2/channel 6 code
of the new remote control
has been memorized
Erase all
channels
— 19 — 2 chirps
All remote control codes
have been erased; program
in new remote control(s)
Set channel
6 timer
✱ 30sec. 25
When the desired interval has
passed, turn off the ignition key
1 chirp
Timer has been set to the
interval of your choice
between 1sec. and 2min.
✱
WARNING: If the built-in timer controls window/sunroof closure on your vehicle,
DO NOT change the timer setting! This requires installer-only programming.
Changing the value will adversely effect operation and may cause damage.
16