FRITSCH PULVERISETTE 5/4 classic line - Manual (Page 16)

2. Switch on the device with the main switch (10) on the back side of
the device, and release the STOP button.
3. If POWER SUPPLY is flashing, the device is in setup mode. If
POWER SUPPLY is not flashing, repeat the procedure.
4.
NOTICE!
In the display above the right "-" button (x) in the
TIMER field, there must be a minus sign. That acti-
vates the imbalance switch and prevents a drift of
the device and possible damage to the device
resulting from it.
When the imbalance switch is deactivated a "1" will
be displayed in the TIMER field over the right "-"
button (x)!
5. To save and end setup mode, press the STOP button.
Safety information and use
- 16 -