FRITSCH PULVERISETTE 7 classic line - Manual (Page 15)

1. Press and hold the STOP button on the control panel (4).
2. Switch on the device with the main switch (8) on the back of the
device, and release the STOP button.
3. If POWER SUPPLY is flashing, the device is in setup mode. If
POWER SUPPLY is not flashing, repeat the procedure.
4.
NOTICE!
In the display above the right "-" button (x) in the
TIMER field, there must be a minus sign. This indi-
cates that the imbalance switch has been activated,
preventing the device from shifting position and any
resulting damage to the device.
Safety information and use
- 15 -