Flylink HD Motion Detection G-sensor - Manual (Page 3)

A. Working by the built-in Li-ion battery
Charging way:(1) charging by the car charger
(2) charging by connecting to computer
Remark: while charing,the green light is on,when the dvr is fully charged,the
green light will be off automatically.
B. Working by the USB car charger
When the car powers on,the DVR will start recording automatically;10minutes
after the car powers off,the DVR will save the files and power off .
Remark: the car power must be with 5V output and have to press the power
on/off button ⑵ for long time or cut off the power when connecting the car car
charger,so that the DVR can be turned off.
 Recording mode
1) Shortly press the ON/OFF key ⑵ or connect the car charger,the DVR will
enter the recording mode.(please insert the TF card first),now the blue light
will flash,the recording files will be saved in the TF card automatically.
2) When taking away the USB car charger or long pressing the ON/OFF key
⑵,the DVR will power off,and the blue light will stops flashing.
 Emergency lock
While recording,shortly press the ON/OFF key ⑵,lock the current file. During
cycle recording,the file will not be deleted.
 Taking photos mode
1) Shortly press the ON/OFF key ⑵ to start the DVR,and press the playing key
⑺ to stop recording.
2) Shortly press the ON/OFF key ⑵,it enters the photo taking mode,press
confirm key ⑺,one photo is taken.
 Review and Delete files
1) Power on the DVR and press Record key ⑺ to stop recording. Shortly press
the ON/OFF key ⑵ twice ,it enters reviewing mode. Press UP key ⑸,choose
the recorded file and press Play key ⑺ ,now we can play or review the file.
2) If we want to delete the fil, after stopping recording,press Menu key ⑷,it
enters Deleting mode.Press Down key ⑹,choose deleting or formating; press
Menu key ⑷ again,it closes operations.
 Functions setting
1) Power on the DVR and stop recording, press Menu key ⑷,it enters setting