Elektron C6 - Manual (Page 4)

FUNCTIONS OF THE CONFIGURE WINDOW
FUNCTIONS OF THE CONFIGURE WINDOW
MIDI IN
Lists available MIDI ports ready for selection. Select one.
MIDI OUT
Lists available MIDI ports ready for selection. Select one.
• [Ok] Accept and save changes
• [Cancel] Exit window without saving changes.
• Reload Files. When this option is chosen C6 will reload the files open in the data browser
when the program is started next time.
• Delay
XP
Time in milliseconds between each package when sending MIDI out. Increase this
number if you have problems with transfers not making it over to the other side. Typical
amounts should be in the 5 to 50 region.
OS X
Time in ticks between packages when sending an audio file as a MIDI SDS dump. A tick
is around 1/60 second. Increase this number if you have problems with transfers not
making it over to the other side. Typical amounts would be 1 or 2.
• Turbo Limit. This lets you limit the transfer speed selected when you press the turbo
button in the main program window. A turbo enabled MIDI interface such as the Elektron
TM-1 is needed.
• SDS Handshake. Select whether to use handshaking or not when sending samples. This
is needed by the Analog Rytm.
• Use Extended SDS. Uses extended SDS messages allowing larger files and sample
names. This is supported by the Analog Rytm.
• Send SPS-1UW Name. From MD OS1.62 the SPS-1UW allows a 4 letter sample name.
Select whether such a name should be constructed from the file name and sent to the
C6 SysEx Tool User´s Manual 4