EKLIPES EKLIPE 2000 Amp EZ Jump-Start 12 Volt Battery Harness - Manual

NOTE! READ ALL INSTRUCTIONS BEFORE INSTALLATION
The EKLIPES EK1-153 Battery Harness is actually two Battery Harnesses in one housing with 2 Plugs.
The Package includes our New 2 Ft 3 inch Jump-Start Battery Harness, with Red Battery Eyelet for positive and Black
Battery Eyelet for Negative.
This harness has 2 electrical plugs. Plug # 1 (as seen in picture above) is a Dims 12 gauge female BMW Jumper
Plug which does not have an inline fuse link, so make sure you test the Dims Female BMW plug continuously
during your installation.
Plug # 2 (as seen in picture above) is an SAE Dual-Pin Quick Connector Plug and has an inline 15 amp fuse link to
protect all your electronic devices.
Check BMW Plug before installation to the battery to make sure Electrical connectors are securely connected on
the Plug before you attach eyelets Red and Black to Battery Terminals to prevent shock.