ClearSounds NECKLOOP CLA7 - Manual (Page 8)

8
Low Battery Indicator
The low battery indicator monitors the condition of the batteries. This
indicator will turn red to indicate the batteries should be changed.
The indicator will only turn red while in use. Replace batteries as
soon as possible with 2 AAA Alkaline batteries
(See diagram #2) .
Making And Receiving Calls
1. Place the wire around your neck and insert the round
connector plug into the Neckloop Quick Disconnect plug,
forming a loop
(See diagram #3) . IMPORTANT: To have the
Neckloop operate Properly, you will need to be sure the
connection is double clicked.
2. Connect the 2.5 mm plug of the CLA7 into the
telephone’s 2.5 mm headset jack (See diagrams 4, 5 & 6).
3. Switch your hearing aid to “T” or “MT” mode.
4. Press the “ON/OFF” button. The green light will turn on.
5. Use your telephone in the normal way (making and
receiving calls). See the phone’s owner’s manual for
instruction.
DIAGRAM #2
Low battery indicator
DIAGRAM #3
Setup of CLA7