ClearSounds NECKLOOP CLA7 - Manual (Page 7)

7
Installation &
Operation Steps
Installation and operation of your ClearSounds™ CLA7
Amplified Powered Neckloop is easy.
Installing The Batteries
IMPORTANT: The CLA7 needs to be disconnected from the
telephone before installing the batteries.
1. Open the battery compartment door located on the
back of your CLA7 by pulling back the latch.
2. Insert correctly (2) AAA alkaline batteries (included) in
the battery compartment. Be sure to observe battery
polarity as imprinted on the base of the compartment.
(See diagram #1) .
3. Snap the battery compartment door back in place.
4. The CLA7 is ready to use.
NOTE: The batteries will have approximately 30 to 40 hours
of use before needing replacement. Battery life will depend
on actual usage and amplified levels.
DIAGRAM # 1
Installing the batteries
+
+