Delptronics Trigger Man - Manual (Page 3)

Trigger Man User Manual
V2
3 of 20
Terminology
Sequences and Patterns
The terms sequence and pattern are used very specifically in this manual, so it is important to
understand the distinction.
A sequence is a set of up to 8 steps. Each output jack has its own sequence of up to 8 steps.
A pattern is a set of 8 sequences. Think of it as an 8 by 8 grid, with steps in the X axis and the outputs in
the Y axis – just like the Step and Output LEDs on the panel. The step LEDs show the sequence for one
output at a time, and one of the output LEDs is illuminated to show the output being edited. There are 8
separate pattern memories.
Controls, Jacks, and LEDs
This manual refers to the controls, jacks and LEDs by the names shown below.
Clock Control
1 2 3 4 5 6 7 8
40
ч1
70
ч2
105
ч3
170 ч6
200
ч8
230
ч12
295
ч32
135
ч4
265
ч16
Output
Tempo
Step LEDs
Knob 1
Knob 2
Output LEDs
Output Jacks
Tempo/Divider Knob
Start/Stop and Mode Buttons
Clock and Mode LEDs
Clock and Control Jacks