Chicago Electric 67845 - Manual (Page 10)

Page 10 For technical questions, please call 1-800-444-3353. Item 67845
maintenance and Servicing
procedures not specifically explained in this manual must
be performed only by a qualified technician.
tO pRevent SeRiOuS inJuRY FROm aCCiDental OpeRatiOn:
make sure that the power Switch/trigger is in the off-position and unplug the tool
from its electrical outlet before performing any procedure in this section.
tO pRevent SeRiOuS inJuRY FROm tOOl FailuRe:
Do not use damaged equipment. if abnormal noise or vibration
occurs, have the problem corrected before further use.
Cleaning, maintenance, and lubrication
1. BeFORe eaCh uSe, inspect the general
condition of the tool. Check for:
• leaking, swollen, or cracked battery pack,
• loose hardware,
• misalignment or binding of moving parts,
• cracked or broken parts, and
• any other condition that may
affect its safe operation.
2. aFteR uSe, wipe external surfaces
of the tool with clean cloth.
3. NiCd BATTERY MUST BE RECYCLED OR
DISPOSED OF PROPERLY.
Do not short, incinerate or open battery.
4. Disconnect battery pack and store battery pack,
charger, and tool in dry, indoor area out of
reach of children and away from metal objects
(i.e., paperclips, coins) to prevent shorting.
Sa
Fet
Y
Ope
R
ati
O
n
m
aintenan
C
e
Setup