Cub Cadet 1222 - Manual (Page 23)

23
SECTION 10: SPECIFICATIONS
Capacities
Fuel Tank 3 gallons (11.4 l)
Crankcase (approximately) 4 pints / 64 oz. (1.9 l)
Hydrostatic Transmission
Make and Model Hydro-Gear 311-3000
Gear Ratio 30.6:1
Forward Speed 0 m.p.h. - 5.5 m.p.h.
Reverse Speed 0 m.p.h. - 2.5 m.p.h.
Engine (Air-cooled, 4-cycle)
Make, Model & Type Briggs & Stratton 40H777-0171
Cylinders Twin
Bore 2.97 in. (75.44 mm)
Stroke 2.89 in. (73.4 mm)
Displacement 40.0 cu. in. (656 cc)
Maximum Power @3600 RPM 22 HP
Maximum Torque @2400 RPM 32.7 lbs. ft. (44.3 Nm)
Compression Ratio 8.5:1
Engine Speed (governed)
Low Speed 1200 RPM
High Speed (no load) 3300 RPM (± 100 RPM)
Spark Plug Gap .030 in. (.76 mm)
Armature Air Gap .008 -.012 in. (.20 -.30 mm)
Electrical System
System Voltage 12-volt Negative Ground
Battery 270 CCA (sealed)
Alternator 16 Amp Regulated
Fuse (automotive type) 20 Amp
Headlights Incandescent
Brakes Single Disc (Dry)
Turf Tires
Front (inches) 16 x 6.5
Rear (inches) 23 x 9.5
Dimensions
Wheelbase 48 in. (121.92 cm)
Length, over all 68.5 in. (173.99 cm)
Height, over all 42 in. (106.68 cm)
Ground Clearance 6 in. (15.2 cm); Ground Clearance for Deck: 1.75 in. (4.445 cm.)
Turning Radius 21 in. (53.34 cm)
Weight (approximate) 529 lb (238.28 kg)