Cub Cadet 642 - Manual (Page 18)

18
SECTION 6: SPECIFICATIONS
Engine and Electrical
Make Kohler Command V-Twin OHV
HP 20 HP
Type 4-Cycle Gas
Cylinders 2
Valves Overhead
Displacement 38 cu. in. (624cc)
Maximum Torque 32.6 lb-ft @ 2600 rpm
Ignition Transistor Controlled
Lubrication Full Pressure w/ Oil Filter
Oil Filter Replaceable (standard)
RPM, idle (no load) 1300 ± 150
RPM, fast (no load) 3,950 - 4000
Cooling System Air
Air Cleaner Heavy Duty, Replaceable, Dual Element
Battery 30-amp/hr, 365 cold cranking amps
Alternator 12V-65 amp. Regulated
Headlights Two 37.5-watt Halogen
Wiring Automotive Style Fused Control System
Dimensions
Overall Length 115.4”
Overall Width 65.75”
Front-Tread Centers 50.0”
Rear-Tread Centers 52.0”
Overall Height 41”
Wheel Base 84.75”
Weight (including fuel/fluids) 1,552 lb.
Ground Clearance
Under Transaxle
6.4”
Under Foot Platform 7.5”
Seating Capacity 2 persons
Seat Type High Back
Turn Clearance Circle 22.2 ft.
Payload Capacity* 1,600 lb.
*Includes 200 pound operator, 200 pound passenger, and maximum bed capacity
Fuel System
Capacity 5.7 U.S. gal.
Low Fuel Indicator Dash Indicator Light
Cargo Box
Material 14-Gauge Steel
Attachment Rubber Isolated
Capacity
Volume
13.4 cu. ft.
Weight 1,200 lb.
Steering Rack & Pinion w/ Ackerman-Type Geometry
Suspension 6 Wheel Fully Independent w/ Coil Over Shocks
Brakes Wet Disk in Transaxle
Parking Brake Foot Operated
Transmission
Type Continuously Variable (CVT)
Lubricant Shell TTF-SB Oil
Capacity 189 oz (5.5 liters)
Differential Lock Standard, Hand Operated
Drive Chain No. 60 Industrial Roller Chain
Ground Speed 0-19 mph
Transaxle Fully enclosed, Oil Bath
Gear Selection Forward, Neutral, Reverse
Rear Axle Housing Welded Steel