Specifications – Cub Cadet 7 Fabricated Deck User Manual
Page 7
7
SPECIFICATIONS
Engine:
29HP, Digital Fuel Injection, Liquid-Cooled, OHV, Kawasaki
Type:
Horizontal Crankshaft, V-Twin
Air Cleaner:
Dual Element, Canister Type
Lube System:
Pressurized with oil filter
Starter:
12-volt electric
Traction Drive:
Variable-speed hydrostatic pumps and hydraulic wheel motors for
each drive wheel
Hydraulic Tank:
4 quart capacity, One quart filter
Cutter Deck;Drive:
Belt Driven
Clutch:
Electric blade brake clutch
Deck Lift:
Hand lever w/pin lock for height adjustment & foot pedal assist
Cutting Height:
1-1/2" to 5"
No. of Blades
3, attach to spindle with 3/4” bolts
Deck Spindles:
1-1/4” diameter tapered-roller bearings, aluminum housing
Controls:
Engine ignition and start switch; throttle; left and right steering
levers; electric blade clutch switch; parking brake; mower deck lift
Parking Brake:
Mechanical linkage attached to the brake handle and drum
brakes
Front Caster Wheels:
13 x 6.50 x 6
Tire Pressure:
8-10 psi Rear, 20-25 psi front caster
Drive Wheels:
60" &
72”
deck, 24x12 - 12
Frame:
2" Steel square tube and plate, all welded construction
Seat:
Adjustable seat with armrests. 5" Adjustment fore & aft
Fuel Tank:
Two 6.5 gallon w/ shutoff valves
Ground Speed:
0-10 + MPH forward. 0-4 MPH reverse
Instrumentation
Hourmeter, Tachometer, Maintenance-minder
Net Weight:
1170 lbs. w/60" deck, &
1325 lbs. w/72” deck