Cub Cadet 7 Fabricated Deck - Manual (Page 31)

31
Front Skirt
Inner Baffle
Discharge Baffle
Cutting Blades
Gauge Wheels
Front Roller
Rear Rollers
Standard set-up
Low
installed
installed
Hi-lift
Low = 3" to 5"
Low = 3" to 5"
Low = 3" to 5"
Stems (Dandelion, Bahia, Buckhorn, etc.)
Med
removed
installed
Hi-lift
High = 1" to 2 1/2" Low = 3" to 5"
High = 1" to 2 1/2" Low = 3" to 5"
High = 1" to 2 1/2" Low = 3" to 5"
Very lush &/or tall grass
High
removed
installed
Hi-lift
High = 1" to 2 1/2" Low = 3" to 5"
High = 1" to 2 1/2" Low = 3" to 5"
High = 1" to 2 1/2" Low = 3" to 5"
Low cut height (1" to 2")
Med
installed
installed
Low-lift
High = 1" to 2 1/2"
High = 1" to 2 1/2"
High = 1" to 2 1/2"
Mulch
Low
installed
removed
Hi-lift/mulch
High = 1" to 2 1/2" Low = 3" to 5"
High = 1" to 2 1/2" Low = 3" to 5"
High = 1" to 2 1/2" Low = 3" to 5"
Material Collection
Low
installed
installed
Hi-lift
High = 1" to 2 1/2" Low = 3" to 5"
High = 1" to 2 1/2" Low = 3" to 5"
High = 1" to 2 1/2" Low = 3" to 5"
Abraisive (sandy), dry
Low
removed
installed
Low-lift
High = 1" to 2 1/2" Low = 3" to 5"
High = 1" to 2 1/2" Low = 3" to 5"
High = 1" to 2 1/2" Low = 3" to 5"
Wet
Low
installed
installed
Hi-lift
High = 1" to 2 1/2" Low = 3" to 5"
High = 1" to 2 1/2" Low = 3" to 5"
High = 1" to 2 1/2" Low = 3" to 5"
Adjustable Front Skirts
- When "
Low
", increases lift for precision cutting. When "
High
", grass rebounds & can cut high volume grasses.
Removable Inner Flow-Control Baffle
- Regulates discharge (
remove
for high volume grasses, and
install
for precision cutting).
Removable Discharge Baffle
- Enhances the discharge spread pattern. Reduces clumping (it should be
removed
for mulching).
Notes: This is a general outline of suggested settings, so keep in mind that your conditions may be different. To avoid damage to grasses, no more than 1/3 of the height should be removed at one cutting (if 6" tall, cut to 4").
Adjustable Gauge Wheels
- Reduces scalping, helps provide precision cutting, and reduces turf defacement during turns.
Adjustable Rear Rollers
-
Reduces scalping, and provides the striped appearance.
Cutting Blades
- Create lift (axial flow), cutting action, and discharge (centrifugal flow). Low to High lift depending on the sail shape.
Discharge Chute
- Controls the output (including thrown objects) and enhances the discharge pattern.
Reconfigurab
le Mo
wer
31