Coway AP-1005AH - Manual (Page 13)

Safety
Information
Operating
Instructions
Troubleshooting
T
ips
C
ustomer
S
ervice
23 24
FILTER REPLACEMENT INSTALLATION METHOD
Make sure to pull power plug out prior to filter cleaning. Contact A/S center to install the product on the wall.
Install using wall-mounted panel saving some distance
from wall and ceiling right and left as shown in the picture.
- When the product is used on the wall, it may contaminate
wall or ceiling.
- Be careful not to drop front cover and filter case down
during maintenance or filter change.
- Do not pull power cord.
Make sure the product is installed strongly on the screw of wall-
mounted panel.
Fitting method
wall-mounting parts
Determine the place on which the
product is going to be installed.
Make a hole to install
hanger using a nail
and put an anchor in.
Place hanger on it
and fix it on the wall
using screw.
�
Place rubber foot on the 2 ea of round
projection on the lower part of the
back side of the product. �
�
Installation on the wall method
screw (6 ea) anchor (6 ea) rubber foot (2 ea)
Hanger (1 ea)
Replacing the Deodorant filter (Every 12 Months)
Open front cover, separate filter case
out of the product and take Deodorant
filter out of filter case. �
�
Cleaning and replacement schedule
※ based on 24 hours/1 day automatic operation.
Remove vinyl packing of new filter, Put
Deodorant filter into the filter case.
Assemble filter case
into the product in
reverse of separation,
and closefront cover. �
�
Cleaning Pre-
Replacement Ag Allergy Shield
Medium Replacement
HEPA Replacement
Deodorant
Every 2~4 Weeks
Every 6 Months
Every 4 Months
Every 12 Months
Every12 Months Replacement
Filters Replacement Cleaning
Pre- � medium � HEPA � Ag allergy shield � Deodorant Filter Orders