COP-USA AU40MZ - Manual (Page 13)

13
Press MENU to enter menu press and again to exit menu. After enter the menu,
move the joystick up or down to move the cursor up or down; move
the joystick left or right to adjust the content of current menu.
2.6.1 MAIN MENU at “PROTOCOL SETTING” item, move the
joystick to right, display the submenu “PROTOCOL SETTING”.
Move the joystick up or down to choose the menu item, and move
the joystick right or left to setup the parameter.
¾ PROTOCOL At such item, move the joystick right or left to
display:P000—P001—P002—P003—P004—P005—P006—P0
07—P008—P009—P010—P011—P012—P013—P014—P015
16 kinds of protocols. The corresponding of the protocol code
and protocol name as following:
Table 2
CODE NAME
P000 A01
P001 B01
P002 SANTACHI
P003 PELCO-D
P004 PELCO-P
P005 PANASONIC
P006 LONGCOMITY
P007 HD600
P008 LILIN
P009 VICON
P010 MOLYNX
P011 KALATE
P012 VCL
P013 RESERVED
P014 ALEC
P015 ULTRAK
¾ BAUD RATE At such item, move the joystick right or left to choice the four
baud rates: 2400bps—4800bps—9600bps—19200bps
PROTOCOL SETTI NG
1. PROTOCOL
2. BAUDRATE 9600
3. BACK
P001
MAIN MENU
1.PROTOCOL SETTI NG
2.CAMERA SETTING
3.PROGROM
4.VIDEO CH1
5.OSD ON
6.EXIT