Blue Sky Solar Boost 2000 - Manual (Page 11)

Installation and Operation Manual
10
SOLAR BOOST 2000 SETUP ADJUSTMENTS AND FIELD CONNECTIONS
FIGURE 3
The front panel serves as a heat sink for power control devices and
requires free air circulation for cooling. Do not enclose the front
panel behind a tight fitting door or otherwise substantially restrict air
flow.
SYSTEM WIRING
Wiring requirements for Solar Boost 2000 are different than traditional PV controllers. While the performance
of other controllers may be affected somewhat by wiring, wiring and connections used with Solar Boost 2000 can have
a significant effect on current boost performance. Solar Boost 2000 increases charge current by transforming
previously wasted power into useable charge current. The effect wiring has on current boost performance is that power
wasted heating wires or connections is power that becomes unavailable to charge the battery. RV Power Products
offers a variety of low resistance installation and wiring kits to make installation easy and get the most out of your new
Solar Boost 2000.