Bio Bidet Harmony Luxury Class Bidet Seat BB-400 - Manual (Page 9)

17 Installation Manual and Operating Instructions 16 Installation Manual and Operating Instructions
Before and after using Her Front Wash /
Her Back Wash / His Back Wash ,
the nozzle will automatically clean itself.
During a power outage, the water or seat heating temperature could appear to be lower than
the actual temperature setting.
When pressing the move function while using Her Front Wash/ Her Back Wash/ His Back Wash
the nozzle will automatically move back and forth covering a wider area for washing.
Press move button a second time to stop oscillation.
Other energy saving tips
In order to save energy, please abide by the following instructions:
Keep seat cover closed when not in use to prevent heat from being lost.
Keep temperature set to low.
Unplug the power cord if you do not plan to use it for a long period of time.
When pressing the Economy light on the
electronic toilet seat will turn on.
Economy mode automatically maintains a water and
seat temperature of 89.6 .
If you want to turn off the Economy function,
press the button again and the display light will turn off.
The ( ) display lamp for the Water pressure / Dryer will change when using the dryer function.
Adjust the dryer temperature by pressing
(High), (Low) .
The drying functions can be adjusted up to 5 levels.
When using the wash functions use (Front), (Rear) buttons to adjust the nozzle to fit to your body.
LED level
Front
I
Rear
Front
I
Rear
Nozzle position adjustment
Warm air dryer adjustment
Move
ECONOMY
Automatic self cleaning nozzle
Select a convenient spot near the toilet to attach the remote control holder.
Make sure that the selected spot will not be exposed to water and
the area where you intend to affix the holder is clean and dry.
Remove film from the double sided tape located on the back of the
remote control holder and place the holder in the selected area.
On remote control insert the two(2) batteries (1.5V AA) ensuring that the
poles on the batteries correspond to the directions on the remote control.
Setting up and using the remote control
LED level
High
I
Low
High
I
Low
(+, - please consider the right polarity)
Two (2) batteries
Double
sided
tape
Remote control
holder
As the warm air dryer temperature increases the LED light will illuminate (see above illustration)
Always purchase the correct size and grade of battery most suitable for the intended use.
Clean the battery contacts and also those of the device prior to battery installation.
Remove batteries from equipment which is not to be used for an extended period of time.
Remove batteries if consumed or if product is to be left unused for a long time.
9 Operation (Instructions to operate each function)
OPERA
TION