Bio Bidet BLISS Premier Class Bidet Seat - Manual (Page 8)

Nozzle position is adjustable to the desired position by pressing “ Front ” ( ) or
“ Rear ” ( ) button from 1 to 5 positions.
After using this product, the nozzle will return to position 3.
NOZZLE POSITION ADJUSTMENT
DEODORIZER
When using Posterior or Feminine Washing functions, pressing the “MOVE”( , )
button will provide a short-motion, front to back oscillating spray for a much wider cleansing
experience.
You may change the position of the Oscillating spray by pressing the “MOVE”( , )
button again and “Front”( ) or “Rear”( ) buttons simultaneously.
Push the “MOVE”( , ) button again and the oscillation motion will stop automatically.
Auto-Setting of Oscillation Feature
You can set this function to automatically oscillate whenever the seat is occupied and the Posterior or
Feminine washes are in operation.
Step 1: Sit on this product.
Step 2: Press the “MOVE”( , ) button for 3 seconds or until you hear a single Chime.
Step 3: Sit on the this product and proceed with Posterior or Feminine Wash.
Note: In the automatic setting, you may still adjust the position of the Oscillating spray by pressing the
“Front”( ) or “Rear”( ) buttons.
Canceling the Automatic Oscillation function
Step 1: Sit on this product.
Step 2: Press the “MOVE”( , ) button for 3 seconds or until you hear a double Chime.
OSCILLATION ( Nozzle Movement Function)
Installation Manual and Operating Instructions 14 15
5 Operation (Details)
- Select: Single Chime
- Cancel: Double Chime
Deodorizer ON/Off (initial setting is Off)
- Press button for( , ) 3 seconds (press the button again for 3 seconds, the function is canceled.)
- After setting Deodorizer function, it is automatically activated when sensing the human body.
- Once used, the Deodorizer function automatically stops after 1 minute of operation.
“Deodorizer” button
Press 3 seconds
Single Chime
“Deodorizer” button
Press 3 seconds
Double Chime
Reference - Deodorizer function stops while dryer is selected. After dryer function completes, deodorizer automatically is activated.
WARM WATER TEMPERATURE
AND SEAT TEMPERATURE ADJUSTMENT
WARM AIR DRYER
1- Press “Dry”( , ), warm, dry air is gently directed to washed area for about 3 minutes.
2- You may adjust the warm air temperature by pressing High( ) and Low( ) buttons.
This product memorizes the air temperature of prior use.
WATER PRESSURE ADJUSTMENT
After sitting down on the this product, the LED lamp( ) for water
pressure on the Power Control will light at third or middle level( ).
Press high( ) , or low( ) to adjust the pressure of the water spray to
your desired comfort level.
The temperature of water and seat are adjustable to the desired level by pressing
the “WATER”( )and “SEAT”( ) button.
OFF /
Room temperature
GREEN
approx. 93.2
ORANGE
98.6
RED
104
WATER TEMPERATURE
OFF /
Room temperature
GREEN
approx. 93.2
ORANGE
98.6
RED
104
SEAT TEMPERATURE
BB-1700
WARM WATER TEMPERATURE
AND SEAT TEMPERATURE ADJUSTMENT
The temperature of water and seat are adjustable to the desired level by pressing
the “WATER”( )and “SEAT”( ) button.
OFF /
Room temperature
GREEN
approx. 93.2
ORANGE
98.6
RED
104
WATER TEMPERATURE
BB-2000
SEAT TEMPERATURE
BB-1700 BB-2000
OPERA
TION