Barcus Berry 1460-N12 - Manual (Page 5)

TOOLS NECESSARY FOR INSTALLATION OF 1460 TRANS-
DUCER
• Variable speed electric drill
• 3/32” drill bit
• 15/32”(11.9mm) drill bit
• Tapered reamer with 1/2” maximum diameter
• Soldering iron (25 watt preferred)
• 60-40 rosin core solder (60-40 alloy multi-flux type is ok)
• Cardboard piece or similar material approx. 1.5’ (45cm) square
• Straight edge (minimum of 4” or 10cm in length)
• Flat type file (fine texture optimum)
• Adjustable crescent wrench or 1/2” open ended wrench