Cub Cadet Hydrostatic Zero-Turn Commercial Riding Mower Professional Turf Equipment - Manual (Page 8)

8
SPECIFICATIONS
GENERAL INFO.
Controls:
Engine ignition and start switch; throttle; choke; left and right
steering levers; electric blade clutch switch; parking brake;
mower deck lift
Parking Brake: Mechanical linkage brake handle to internal drum brakes
Seat: Adjustable seat and armrests. 5" Adjustment (fore-aft)
Frame: 2" Steel structural tube and plate, all welded construction
Instrumentation: Hour meter, Tachometer, Maintenance-minder
Front Caster Wheels: 13 x 6.50 x 6
Drive Wheels: 24x12 - 12
Tire Pressure: 8-10 psi Rear, 20-25 psi front caster
Fuel Tank: Two 6.5 gallon w/individual shutoff valves
Ground Speed: 0-12 + MPH forward. 0-5 MPH reverse
Net Weight: 1090 lbs. w/60" deck
ENGINE INFO.
Engine:
25HP Kawasaki, & 27HP Kohler
Type: Vertical crankshaft air cooled V-Twin
Air Cleaner: Dual Paper Element with rain cap
Lube System: Pressurized with oil filter
Hydraulic System: In tank filter, 3 quart capacity
Starter: 12-volt electric
Blade Brake Clutch: Electric
TRACTION DRIVE INFO.
Traction Drive:
Engine to two variable-output hydraulic pumps each connected
to individual wheel motors
CUTTER DECK INFO.
Cutter Deck;Drive:
60" Belt Driven
Deck Lift: Hand lever w/pin lock for height adjustment
Cutting Height: 1-1/2" to 5" in 1/4” increments
No. of Blades 3, belt-driven, power take-off from engine