AVF Group ZML8400: Flat TV Mount for ANY WALL - Manual (Page 3)

2 Tools Required
3 Determine Correct TV Screw Size
Choose from the TV Fixings selection.
You need to determine which length
and diameter of screws fits your TV.
To determine the correct screw diameter,
try screwing (G
2
), (G
5
), (G
8
) & (G
11
) into
one of the fixing holes on the back of the
screen until you find the one that fits.
4 Fit Screen Hangers To TV
Once you have established which screws you need for your TV, you can attach the Hangers (C)
and Stand-offs (D) to the back of your TV.
Typical recommended example shown is for fixings with the TV spaced 20mm from the wall.
The TV Mount can position your TV between 12mm and 40mm from the wall. For alternative
configurations see section 11.
You might need to use spacers to increase the clearance of your TV from the wall in order to avoid
cables coming out of your TV and improve access and ventilation to the back of your TV (spacers
(E1) allow you to have a gap of 20mm or 40mm, see section 11).
In certain circumstances it may be necessary to use red spacer (E2) as either a replacement or
addition to spacer (E1), for more information please see section 11.
If your TV fixing centres don’t fit, STOP installation and contact the customer services helpline.
G
2, 5 ,8, 11
Top Fixings
F
1, 2, 3 * If Required
G
2, 5 ,8, 11
Bottom Fixings
*
F
1, 2, 3
G
2, 5 ,8, 11
If using screw use Adapter (F
1
) (G
2
)
If using screw (G
5
) use Adapter (F
2
)
If using screw (G
8
) use Adapter (F
3
)
If using screw (G
11
) No Adapter required
*
TV must be parallel
to wall. Use spacers /
stand-offs as shown.
C
E
1
D
E
1