AvaLAN Wireless AW-900x - Manual (Page 3)

aW900x User’s Manual
PaGe 3 www.avalanwireless.com Technical support :: (650) 384.0000
System diagram
Quick setup
1) Plug in the AW900x using the supplied injector and power adapter.
2) Connect an Ethernet cable from each AW900x to a network device.
3) Send Ethernet traffic. For troubleshooting, see Page 4.
Each AW900x radio automatically selects the best radio channel, encrypts the Ethernet traffic, and transports the data wirelessly to its
mate. Any Ethernet device can be connected to the AW900x. The AW900x functions in place of an Ethernet cable and provides a trans-
parent wireless point-to-point Ethernet cable replacement. Crossover cables are not necessary as the AW900x automatically senses
the device (client or switch).
900 MHz
digital
ethernet
bridge
RF connector
RP-TNC
RF connector
RP-TNC
AW900x
AW900x
CAT5 cable
(not included)
CAT5 cable
(not included)
CAT5 cable
(not included)
CAT5 cable
(not included)
Power over
Ethernet injector
Power adapter
110 VAC
Power
9 to 48 VDC
Data
Ethernet
RJ45/10BaseT
Power adapter
110 VAC
Power over
Ethernet injector
Data
Ethernet
RJ45/10BaseT
Power
9 to 48 VDC