AvaLAN Wireless AW-900i - Manual (Page 4)

aW900i User’s Manual
PaGe 4 Technical support :: (650) 384.0000 www.avalanwireless.com
LED display
Troubleshooting
see the online installation tutorial and FaQ at www.avalanwireless.com.
no radio link leD
radio lInK leD is on but link Quality Indicator is low
no ethernet lInK leD
Installing multiple systems in close proximity
still not working?
no Power leD
Check the power connections.
The radio is looking for its matched partner. If both units are powered up and the Power LEDs are active, they may be too far away
to create the radio connection. Try other locations that may have a less obstructed path or try to reorient the antennae. Yagi type
antennae get their best range when they are oriented to point directly at each other with the antenna elements oriented in the
same place (eg. vertically or horizontally).
The units may be too far away to create a good radio connection. Try other locations that may have a less obstructed path, or try to
reorient the antennae.
Check your network connections.
See the online installation tutorial and FAQ at www.avalanwireless.com
Temporarily use an Ethernet cable to see if the network is working over a wired connection. If an Ethernet cable does not work
then the problem is with the network.