AvaLAN Wireless AW2400-SPEC - Manual (Page 4)

AW2400-SPEC User’s Manual
PAGE 4 Technical support (650) 384-0000 www.avalanwireless.com
Using the Spectrum Analyzer
1. If you will be using a Windows PC, download the AvaLAN IP Discovery Utility from
our website and extract ipfinder.exe from the zip archive, placing it on your desktop
or in a convenient folder.
http://www.avalanwireless.com >> Support >> Downloads
Note that this utility runs only in MS Windows, not Linux or MAC. If you must use a
non-Windows computer, make sure your subnet mask allows your computer to see
192.168.17.17 and browse to this default address.
2. Run ipfinder.exe and you should see a window similar to this:
The AW2400-SPEC should appear in the list of devices found. If it doesn’t, make sure
the wired LAN network properties on your PC are capable of seeing 192.168.17.17
and try again. (If you have changed the IP address and cannot remember what it
is, open up your PC’s subnet mask to 255.0.0.0 and it should appear when you click
the Search button).
3. From the ipfinder window, you can change the TCP/IP properties of the AW2400-
SPEC if you wish, or just browse to it. Double-click its line in the list, then change
parameters and click “Apply”, or just click “Go to Device Web Page” to launch your
default browser. You can also launch the browser by right-clicking the device line in
the opening ipfinder window.
4. Your browser window will open the AW2400-SPEC’s login page: