High security supplement – AvaLAN Wireless AW2400S-PAIR User Manual

Page 4

High Security Supplement

PAGE 4

Technical support (650) 384-0000

www.avalanwireless.com

5. Next, you will be provided with a popup to en-

ter the encryption key and method (128, 192 or

256-bit). (You will be forced here if you are reset-

ting, or can choose "Input Key" after logging in. The

encryption key is a hexadecimal number, 32 digits

for 128-bit encryption, 48 digits for 192-bit and 64

digits for 256-bit. Enter the digits as 0 - 9 and a - f

or A - F (case independent). If you enter fewer than

the specified number of digits (not recommended),

the remainder will be padded with zeros.

6. Once the encryption module has been pro-

grammed, you may login to access the other fea-

tures. "Self Test Results" will simply display "Self

Test Passed" in the status box. If it does not, con-

tact AvaLAN Technical Support. Module Firmware

Version displays that information in the status box

and may be useful to the aforementioned AvaLAN

Technical Support staff.

7. When you are finished with the configuration of the encryption module, discon-

nect the USB cable and replace the cap on the connector. Then cycle power through

the LAN cable to restore the wireless radio to normal operation.