AvaLAN Wireless AW2400xTR - Manual (Page 6)

AW2400xTR
PAGE 6 Technical support (650) 384-0000 www.avalanwireless.com
User’s Manual
7. The admin page has sections similar to the login page showing radio statistics
and device information plus it adds several new sections. The Device Settings sec-
tion allows setting the network information and choosing an RF frequency channel.
The default is to allow the radio to choose its own frequency based on minimizing
interference. If you set a fixed channel, make sure the AP and all SUs use the same
one. References to DIPs on this and the next web page refer to switches inside the
radio that are used in the legacy method of configuration and may be ignored when
using the browser method.
If you scroll down in the Admin browser page, you will come to three more sections:
• A graphical spectrum analyzer display that may help you to select radio chan-
nels that avoid interference
• A section to be used if an update to the AW2400xTR’s firmware is required
• An Advanced Links section with a dire warning about advanced users only.
Despite the warning, you will need to click the “Advanced Admin” button in order
to set the device type, ID and encryption key. You should then see a page similar to
that on the next page.
6. The browser page that loads first shows the current device information and QoS
statistics and provides a login at the upper right. Log in using the password you just
specified (or “password” if you kept the default). If the login succeeds, you will see
an admin page similar to this: