Alyseum AL-88 - Manual (Page 8)

AL-88 – User’s manual © - Revision 1.7
Page 8
6.4 Settings
AL-88 settings are done via the CopperLan Manager (Editor tab)
1. Enable or disable the front button FN (Exemple: protect your AL-88 against
unauthorized users).
2. Restore originals MIDI In connections – for standalone applications.
3. Save MIDI In destinations – for standalone applications.
4. Enable or disable the active sensing on MIDI Out 1.
5. Enable or disable the active sensing on MIDI Out 2.
.......
11. Enable or disable the active sensing on MIDI Out 8.
The save is done automatically.
6.5 Firmware Upgrade software
Upgrading the firmware is done via the network.
This is done automatically through the CopperLan Manager via an internet connection or via
the Firmware updater program.