4 rear panel description, 5 function push button (fn) – Alyseum AL-88 User Manual
Page 5
AL-88 – User’s manual © - Revision 1.7
Page 5
4.4
Rear panel description
IN
10/100 Base-T
ALYSEUM
90-230 VAC
IN
OUT
IN
IN
IN
IN
IN
OUT
OUT
OUT
OUT
OUT
OUT
MIDI 3
MIDI 2
MIDI 1
MIDI 4
MIDI 5
MIDI 6
MIDI 7
8
9
10
11
12
13
14
15
16
8.
Inlet power – IEC60320 – 90 to 230VAC auto-sensing
9.
DIN41524 (5 pin) – MIDI In & Out Port 1
10.
DIN41524 (5 pin) – MIDI In & Out Port 2
........
15.
DIN41524 (5 pin) – MIDI In & Out Port 7
16.
RJ45 – Ethernet connector – 100 Base-T
4.5
Function push button (FN)
This button gives access to three functions:
4.5.1 Panic
A short press (less than a half second) sends various messages to all destinations
connected to the box.
These messages are meant to stop hanging notes and reset various settings such as to
resume normal use.
Connections are unaffected by the panic function.
This function can be disable via the CopperLan Manager (settings tab)
4.5.2 Store
settings
A long press (over 1 second) will store in non-volatile memory all current settings of the box,
including the Inputs connections.
4.5.3
Firmware upgrade mode
Press and hold the FN button while turning on the AL-88. When the LED blinks slowly,
release the FN button
Now, the AL-88 is in “Firmware upgrade mode” (see 5.6)