ALFA NETWORK R36 - Manual (Page 8)

8
ETHERNET WAN PORT
A 100BASE-TX RJ-45 port that can be attached to an Internet
access device, such as a DSL or Cable modem.
ETHERNET LAN PORT
The 3G Mobile Wireless Router has one 100BASE-TX RJ-45
port that can be attached directly to a PC or 10BASE-T/100BASE-TX LAN segments.
This port supports automatic MDI/MDI-X operation, so you can use straight-through
cables for all network connections to PCs, switches, or hubs.
3G & USB Wireless Card USB PORT
Supports connection to a wireless cellular 3G or
USB Wireless Card for broadband Internet access.
POWER CONNECTOR
The 3G Mobile Wireless Router must be powered with its
supplied power adapter. Failure to do so results in voiding of any warrantly supplied
with the product. The power adapter automatically adjusts to any voltage between
100~240 volts at 50 or 60 Hz, and supplies 12 volts DC power to the unit. No
voltage range settings are required.
WPS BUTTON
Press the WPS button to automatically configure the 3G Mobile
Wireless Router with other WPS devices in the WLAN.
REST BUTTON
The Reset button is used to restore the factory default configuration.
If you hold down the button for 5 seconds or more, any configuration changes you
may have made are removed, and the factory default configuration is restored to
the 3G Mobile Wireless Router.