ALFA NETWORK R36 - Manual (Page 24)

24
server authentication. (Options: PLAIN, LOGIN, or Disabled.)
■ User Name — Enter the user name for the SMTP server account.
■ Password — Enter the password for the SMTP server account.
■ Mail Server — Specifies the URL of the SMTP mail server that will send the alert
messages.
■ Mail Sender — Specifies an E-mail address on the SMTP server that will send
the alert messages.
■ Mail Recipient — The E-mail address of the recipient of the alert messages.
◆
Budget Counter — Select the day of the month on which to reset the time/data
budget counters. (Default: 1st day per month)
Press Next to bring up configuration page for R36’s SSID and Security Mode, ALFA-3G
is the SSID in this document/example.
◆
Security Mode — Specifies the security mode for the SSID. Select the security
method and then configure the required parameters. (Options: Disabled, Open,
Shared, WEP-AUTO, WPA-PSK, WPA2-PSK, WPA-PSK_WPA2-PSK, WPA, WPA2,
WPA1_WPA2, 802.1X; Default: Disabled
◆
Access Policy — The 3G Mobile Wireless Router provides a MAC address filtering
facility. The access policy can be set to allow or reject specific station MAC addresses.
This feature can be used to connect known wireless devices that may not be able to
support the configured security mode.
Press Done to save the configuration.
After R36 3G Router is back online from rebooting, you may login the management
page to check its status and associated information.