A-Designs HAMMER - Manual (Page 5)

Specifications
Owner’s Manual
|
5 HM2 EQ Hammer ™
TECHNICAL DATA
Noise Floor . . . . . . . . . . . . . . . . -94dbm with a 30KHz Bandwith
Frequency Response . . . . . . . . . . . -3dB points are 5Hz and 40KHz
Low Boost . . . . . . . . . . . . . . . . . +13dB
Low Cut . . . . . . . . . . . . . . . . . . -13dB
High Boost . . . . . . . . . . . . . . . . +13dB
High Cut . . . . . . . . . . . . . . . . . . -13dB
Low Pass . . . . . . . . . . . . . . . . . 84Hz
High Pass . . . . . . . . . . . . . . . . . 8Khz
Floating . . . . . . . . . . . . . . . . . . “Q”
Distortion . . . . . . . . . . . . . . . . . +4dbm
Power Requirements: . . . . . . . . . . . 120/230 VAC - 42 Watts
Dimensions (W x H x D) . . . . . . . . . . 19” x 3.5” x 10”
Weight . . . . . . . . . . . . . . . . . . . 10 lbs.(Shipping weight 12 lbs.)
In line with our company policy of continuous development, the above specifications are subject to change without notice.
The HAMMER is a 2RU rack space unit which fits nicely into any Studio Rack and will compliment your array.
UNIT SIZE:
Width: Standard 19 inches for easy Rack Mount installation.
Height: Standard 3.50 inches or 2RU Rack Space.
Depth: 10 inches
Weight: 10 lbs.