acidlab Bassline2 User Manual
Page 11
11
Press the buttom Write/Next again, and the step 3 is shown, etc.. After the last step
of the patterns (dependent on the pattern length programming) the cursor jumps back
on step 1.
A second possibility to select the Step
Press the buttom Select continuously, and the first LEDs of the row light.
With pressing one of the buttoms 1-8 of the keyboard, the step is directly selected
e.g. the step 7. Now this step can be changed.
With pressing the buttom Select twice and holding, the upper eight LEDs 9-16 lights,
and with the buttoms 1-8 of the keyboard, the steps 9-16 can be selected directly.
The LED in the upper LED row, shows the active step.