Cleveland Range Convotherm PC-Control - Manual (Page 23)

Operating Instructions
3. CONVOTHERM PC-Control
page 9
10 July 2006 CONVOTHERM PC-Control
Tips + Tricks:
Several Programs in the Program List can be marked before opening the Send window by
clicking on them with the left-hand mouse button, as follows:
• From Program number X to Program number Y by pressing the Shift key.
• Single non-consecutive Program numbers by pressing the Ctrl key.
• If Programs are to be sent to all the registered Combis, these can be marked with the
Select all button.)
Notes:
• If no Combi is marked as a transmission target, none of the Programs selected are
sent.
• Only single Programs can be used with Send+Start or Send+Autostart and the items
All programs and Selected program(s) can no longer be selected.
• With
Send + Autostart the time button on the Combi must not be disabled.