Casio EX-Z3 - Manual (Page 50)

50
BASIC IMAGE RECORDING
Using the Flash
Perform the following steps to select the flash mode you
want to use.
1. In the REC mode, press [MENU].
2. Press [ ̄ ] ( ) to select
the flash mode.
• Each press of [
̄
] ( )
cycles through the flash
mode settings shown below
on the monitor screen.
Flash mode indicator
DISP
MENU
SET
[ ̄ ] ( )
IMPORTANT!
• Digital zoom is disabled whenever the monitor
screen is turned off (page 24).
• Using digital zoom can cause degradation of the
recorded image.