Panasonic GP-RV201 User Manual

Page 9

Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

5. Install the Connector Cover into the chassis of the

Bracket.

6. Adjust the camera to the desired angle and fix the

Camera Unit into the Bracket using 4 Camera Angle

Adjusting Screws,

Mounting the camera onto the top of the rear

panel of the vehicle.

1. Remove 4 Camera Angle Adjusting Screws and

remove the Camera Unit from the Bracket.

Remove 4 Angle

Adjusting Screws

2, Secure the Bracket on the top of the rear panel

of the vehicle by using 4 bolts (obtained locally (6

mm/diameter bolt)).

- 7 -