Antenna connections, Cable / antenna connection, Optional cable connections – Panasonic CT-F2111X ES User Manual
Page 7: Ac power supply cord
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
I
nstallation
Optional Cable Connections
Shielded audio and video cables should be used between components. For best
results:
n Use 75-ohm coaxial shielded cables.
□ Use appropriate input and output connectors, that match your component connectors,
n Avoid long cables to minimize interference.
AC Power Supply Cord
CAUTION:
TO PREVENT ELECTRIC SHOCK MATCH WIDE
BLADE OF PLUG TO WIDE SLOT OF AC OUTLET AND FULLY
INSERT. DO NOT USE A PLUG WITH A RECEPTACLE OR OTHER
OUTLET UNLESS THE BLADE CAN BE FULLY INSERTED TO
PREVENT BLADE EXPOSURE.
Polarized plug
PROTECT POWER CORDS FROM BEING WALKED ON, ROLLED OVER,
CRIMPED, BENT OR PINCHED, PARTICULARLY AT PLUGS, CONVENIENCE
RECEPTACLES, AND THE POINT WHERE THEY EXIT FROM THE APPARATUS.
Cable / Antenna Connection
For proper reception, either a cable or antenna connection is required.
Cable Connection
Connect the cable supplied by your local cable company.
Note:
A cable converter box may be required for proper reception.
Check with your local cable company for compatibility
requirements.
Incoming Cable from
Cable Company
75 Ohm VHF/UHF
on back of TV
Antenna Connections
□
For proper reception of VHF/UHF channels, an external antenna is required. For best
reception an outdoor antenna is recommended.
□
Antenna Mode must be set to TV.
incoming Cable from
Home Antenna
Cable Preset
Cable Mode is preset at the factory. Antenna
users must change to Antenna Mode in the
Setup Menu.