Changing the dust bag – Panasonic MC-V6945 User Manual

Page 13

Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

CHANGING THE DUST BAG

Always operate the vacuum with a genuine Panasonic Type U3 or U6 dust bag installed
Panasonic dust bags may be ordered through any authorized Panasonic dealer

Pull outward on the

dust cover grip,

located on the top

front of the dust
cover and remove
the cover

To remove the dust

bag, grasp the
cardboard portion
of dust bag and
pull It out

Spread out the end of the
new dust bag

NOTE.

Pull carefully so

as not to tear the bag at
the folds

- p"

■

□ o

Attach the new dust

bag onto the bag
holder by holding

the bag collar and

pushing back as
Illustrated

The dust bag must be
completely installed

inside the dust

compartment for

proper operation

The dust bag should

not be caught
between the
lower edge of

the dust cover
and the gasket
as indicated by
the arrow in
the illustration

Reinsert the tabs
provided on the end

of the dust cover into
the grooves on the
dust compartment
and press the
cover into place

NOTE

The dust

cover must be
completely
and correctly
installed for
proper
operation

Grooves

- 1 3 -

This manual is related to the following products:

MC-V6975