Panasonic NI-860R - Manual (Page 5)

Before ironing, sort the garments according to the different heat settings required.
Iron fabrics that need a lower temperature first.
Do not touch plastic buttons with a hot iron because they may melt.
Be careful around zippers and similar items to prevent the soleplate from scratching.
HOW TO FILL
Make sure the iron is turned off and the AC power cord is unplugged from the electrical
outlet.
The iron can be filled with the capsule tank in place or removed. Confirm that the steam
button is pressed to the dry ironing position (DOWN) when installing or removing the tank.
1. With the iron sitting up on
the heel rest, press the
Capsule Locking Button
down and the tank will be
released.
2. Grasp the tank and lift it off
the iron.
NOTE: Do not pull on or
damage the rubber gasket
that joins the main part of
the iron with the Capsule
Tank.
Open the water fill cover
and fill the tank up to the
"MAX" Line on the Capsule
Tank.
To check the level of water,
grasp the tank vertically.
J V.
4. To re-install the capsule
tank, set the tank onto the
main body and press into
place until a click sound is
heard.
5. The water level can be
observed through the
transparent part of the
tank, when iron is placed
vertically. When the water
level becomes low, place
the iron vertically and add
water, following the
procedure described in 1
to 4 above.
HOW TO USE AS A STEAM IRON
1. Fill the iron as described in "HOW TO FILL".
2. Set the iron vertically and make sure the Temperature Selector Dial is set to OFF.
Plug the AC cord into the electrical outlet.
-
5
-