Fabric ironing chart – Panasonic NI-860R User Manual
Page 10
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
FABRIC IRONING CHART
NOTES: 1. Check garment for specific ironing instructions. Always follow manufacturer's
instructions.
2. Iron blended fabrics at setting for lower-temperature fiber or for the
highest-percentage fiber.
3. Use caution, some synthetics may melt at high temperature.
Temperature
Selector Setting
Fabric
Ironing Recommendations
1
ACRYLIC
♦ ACRILAN
♦CRESLAN
♦ORLON
ACETATE
METALLICS
SUEDE
Dry iron on wrong side, or use a press cloth on top
of fabric. Don't sprinkle water directly on fabric to
avoid spots.
To iron suede, cover ironing board with brown paper
and use it as a press cloth.
2
NYLON
♦ANTORON
♦CAPROLAN
SILK
Dry iron on wrong side.
3
PERM. PRESS
RAYONS
POLYESTER
♦DACRON
♦FORTREL
♦KODEL
TRIACETATE
♦ARNEL
W'n W COTTON
Dry iron on wrong side. To touch-up collars,
cuffs, pockets, etc., iron lightly on right side.
4
WOOL
VELVET
Steam ironing is suggested. Never iron
completely dry. To iron velvet, steam iron
holding the slightly above the fabric.
5
COTTON
Steam ironing is suggested. Sprinkle water on
the fabric, depending on its thickness. Iron dark
fabrics on wrong side to avoid unwanted sheen.
6
LINEN
Steam ironing is suggested. Iron dark fabrics on
wrong side to avoid unwanted sheen.
♦ Trademarks of Fiber Manufacturers.
Panasonic Consumer Electronics
Company, Division of Matsushita
Eiectrlc Corporation of America
One Panasonic Way Secaucus
New Jersey 07094
Panasonic Sales Company,
Division of Matsushita Eiectric of
Puerto Rico, Inc.CPSC”)
Ave. 65 de infanterìa. Knn. 9.5
San Gabriel industrial Pack, Carolina,
Puerto Rico 00985
М8200Т-ТK59B
-
10
-