Before use, Parts identification, Charging – Panasonic ES765 User Manual
Page 6
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

Before use
This
Wet/Dry
shaver
can
be
used
for
wet
shaving
with
shaving
lather
or for dry shaving. You can use this
watertight
shaver
in
the
shower
and
clean
it
in
water.
Treat
yourself
to
wet lather
shaves for at least three
weeks
and
notice
the
difference.
Your
Panasonic
Wet/Dry
shaver
requires a little time to get used to
because
your
skin
and
beard
need
about a month to adjust to any new
shaving method.
Charge
the
shaver
for
at
least
8
hours
before
using
it
for
the
first
time or when it has not been in use
for more than six months.
Parts identification
(see fig. 1)
® Protective cap
d) System outer foil release but
tons
© Foil frame
© System outer foil
© Inner blade
© Foil frame release button
© On/Off switch
© Switch lock button
® Recharge lamp
© Charge status lamp
® Trimmer
(D Trimmer handle
© Charging adaptor with auto
matic voltage adjustment
© Wall mount
© Wood screws
How to use the wall mount
The
charging
adaptor
can
be
hung
on the wall using wood screws.
1.
Select an appropriate location on
the wall where the screws can go
in.
2.
Attach the wall mount to the wall
as
shown
with
the
wood
screws,
making sure that the arrow points
up.
3.
Slide
the
charging
adaptor
grooves into the wall mount until it
clicks in.
To
remove
the
charging
adaptor
from the wall mount, slide the adap
tor upward.
Charging
(see fig. 2)
Place
the
charging
adaptor
upright
on a flat surface or mount it on a
wall.
Plug
the
adaptor
into
an
AC
outlet.
It
will
adjust
automatically
to
volt
ages
between
100-120
and
220-
240V AC.
Do not recharge the shaver from the
SHAVERS
ONLY
outlet
(AC
220-
240V) which is usually in hotel bath
rooms in European and Asian coun
tries as it will damage the charging
adaptor and/or outlet.
In some areas, a special plug adap
tor may be required.
Switch the shaver to the “O charge
position” and place it upright into the
charging
adaptor
with
the
switch
facing toward the front.
The charge status tamp will glow red
when the shaver is placed on a right
charging
position.
It
will
turn
to
green when the charging is complet
ed (see fig. 2A).
You can fully charge the shaver in
one hour if the recharge lamp flash
es red (see fig. 2B).