Panasonic MC-V6970 User Manual

Page 18

Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

The hose located on the back of the vacuum cleaner carries the drt from the nozzle

up to the dust bag. If the hose should becorr« clogged:

1. Pull down on the suction inlet cover

and check for clogging in this area.

2. Disconnect the hose from the nozzle

and chedt the hose for clogging.

Plug in the vacuum deaner and turn it on.

While rurrdng the vacuum cleaner virith

the hose disconnected, stretch the hose

in and out to remove the dog.

If the dog stni exists, turn the vacuum deaner

"OFP and unplug the power cord. Turn the

vacuum deaner over, exposing the inderside.

Remove the lower plate. Remove the short

nozzle pipe from Ihe nozzle by Sfling it
straight up. Inspect the hose end and nozzle
pipe arxf dear them of any obstojctions.

Reinstall the nozzle pipe, lower plate and

nozzle hose. See the Removing/lnstailing the

Lower Plata section for detailed instructions.

Cover

(Suction
Inlet)