Cha^jiing theidust bag, Changing the dust bag – Panasonic MC-V6970 User Manual

Page 13

Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

CHA^JiiNG THEiDUST BAG

............................. .'................... ■

Always operate the vacuum with a genuine Panasonic Type U3 (Standard) or U6
(Electrostatic) dust bag installed. Panasonic dust bags may be ordered through
any authorized Panasonic dealer.

1. Pull outward on the

dust cover grip,

located on the top
front of the dust
cover and remove
the cover.

3. Spread out the end of the

new dust bag.

NOTE: Pull carefully so

as not to tear the bag at
the folds.

5. Reinsert the tabs

provided on the end

of the dust cover into
the grooves on the

dust compartment
to allow the cover
to rotate closed.

NOTE: The dust
cover must be
completely
and correctly

installed for
proper
operation

2. To remove the dust

bag, grasp the
cardboard portion

of the dust bag
and pull it out.

Attach the new dust

bag onto the bag
holder by holding

the cardboard

portion and
pushing back as

Illustrated.

Rotate the dust cover up
into the closed position

and press into place.

NOTE: The dust bag

should not be caught
between the

lower edge

of the dust

cover and

the gasket as

indicated by
the arrow in
the Illustration.